Heated & Bolt-In EnviroVaults

Heated
Bolt-in
Heated
Bolt-On

Heated EnviroVault

Beneficial

Heats tank from within for maximum efficiency

Proven

Over 30,000 systems installed in
tanks across North America

Easy

Easy to install & easy to operate

Heated EnviroVaults use flameless explosion proof heaters mounted within a chamber installed ‘inside’ an above ground storage tank. Used for either freeze protection or for maintaining process temperature , heated EnviroVaults have many advantages. Ranging in size from 10,000 Btu/hr up to 240,000 Btu/hr, this heating system provides exceptional heat transfer while using low volumes of gas. This makes the heated EnviroVault one of the most efficient tank heaters on the market.

 

    • CSA CERTIFIED HEATERS
    • UP TO 240,000 Btu/hr INPUT HEAT
    • SAFE & RELIABLE
    • FUEL EFFICIENT
    • INDUSTRY TRUSTED
    • LOW EMISSIONS
    • SILENT OPERATION
    • LOW MAINTENANCE
    • 12V OR 12OV STARTUP
    • PROPANE OR NATURAL GAS OPERATION
Model No.
Size
Capacity
Methane Equivalent Flow Rate
Electrical
Close Spacing Eligible
Self Supporting
Exit Temperature Monitoring
Easy Operator Controls
Model No.
Diameter x Height (ft)
(MMBTU/hr)
(e3m3/d [mscf/d])
Electrical
(10 Meters)
(Concrete Base)
Exit Temperature Monitoring
Easy Operator Controls
E 24-12 (HP/LP)
24"/12" x 12'
0.3
0.2[17]
12V / 24V
E 36-12 (HP/LP)
36"/24" x 12'
1
0.7[25]
12V / 24V
E 48-12 (HP/LP)
48"/36" x 12'
2.4
1.6[57]
12V / 24V
E 60-12 (HP/LP)
60"/48" x 12'
3.7
2.5[88]
12V / 24V
E 72-12 (HP/LP)
72"/53" x 12'
5
3.5[106]
12V / 24V
E 96-12 (HP/LP)
96"/72" x 12'
7.4
5[175]
12V / 24V
E 96-24 (HP)
96"/72" x 24'
15
10 [352]
12V / 24V
E 120-24 (HP)
120"/80" x 24'
30
20[710]
12V / 24V

**Please contact us for custom waste gas volumes greater than identified in the above table

(HP/LP) High-Pressure/Low-Pressure. High-Pressure is considered anything >1psi and Low-Pressure is anything <1psi

Low-Pressure applications can have a reduced capacity. Please contact for more information.

Bolt-In Safe Heat

Beneficial

Retro-fit internal tank heater means
no hot work required

Proven

Trusted by operators to provide freeze protection in the harshest of enviroments

Easy

Easy to install & easy to operate

The Bolt-in is the best way to introduce heat into an existing tank in the field. No need to steam your tank, the Bolt-in is simply installed through the manway of the tank and bolted into place. Heated using flameless, explosion proof heaters, the Bolt-in is designed with between 10,000 Btu/hr to 40,000 Btu/hr of input energy.

 

  • CSA CERTIFIED HEATERS
  • UP TO 4O,OOO BTU/HR INPUT HEAT
  • SAFE & RELIABLE
  • FUEL EFFICIENT
  • INDUSTRY TRUSTED
  • LOW EMISSIONS
  • SILENT OPERATION
  • LOW MAINTENANCE
  • 12V OR 12OV STARTUP
  • PROPANE OR NATURAL GAS OPERATION
  • CAN BE COATED TO MATCH TANK INTERNAL COATING
Model No.
Size
Capacity
Methane Equivalent Flow Rate
Electrical
Close Spacing Eligible
Self Supporting
Exit Temperature Monitoring
Easy Operator Controls
Model No.
Diameter x Height (ft)
(MMBTU/hr)
(e3m3/d [mscf/d])
Electrical
(10 Meters)
(Concrete Base)
Exit Temperature Monitoring
Easy Operator Controls
E 24-12 (HP/LP)
24"/12" x 12'
0.3
0.2[17]
12V / 24V
E 36-12 (HP/LP)
36"/24" x 12'
1
0.7[25]
12V / 24V
E 48-12 (HP/LP)
48"/36" x 12'
2.4
1.6[57]
12V / 24V
E 60-12 (HP/LP)
60"/48" x 12'
3.7
2.5[88]
12V / 24V
E 72-12 (HP/LP)
72"/53" x 12'
5
3.5[106]
12V / 24V
E 96-12 (HP/LP)
96"/72" x 12'
7.4
5[175]
12V / 24V
E 96-24 (HP)
96"/72" x 24'
15
10 [352]
12V / 24V
E 120-24 (HP)
120"/80" x 24'
30
20[710]
12V / 24V

**Please contact us for custom waste gas volumes greater than identified in the above table

(HP/LP) High-Pressure/Low-Pressure. High-Pressure is considered anything >1psi and Low-Pressure is anything <1psi

Low-Pressure applications can have a reduced capacity. Please contact for more information.

Ready to Upgrade Your Operation?

Need help selecting the right product? Our team is available to guide you through site-specific and regulatory requirements. Submit the form below and we’ll be in touch shortly.

14 + 14 =